How to Replace a Floor Drain: A Step-by-Step Visual Guide220

A floor drain is an essential plumbing fixture that allows water to drain from the floor of your home. It is typically located in areas that are prone to water accumulation, such as bathrooms, laundry rooms, and basements. Over time, floor drains can become clogged or damaged, and may need to be replaced. Replacing a floor drain is a relatively simple task that can be completed in a few hours.

Tools and Materials You'll Need:* New floor drain
* Screwdriver
* Adjustable wrench
* Pipe cutter
* Tape measure
* Plumber's putty
* Bucket
* Rags

Step-by-Step Instructions:1. Remove the old floor drain.
* Start by removing the grate or cover from the floor drain.
* Use a screwdriver or adjustable wrench to loosen the screws that secure the drain to the floor.
* Carefully lift the drain out of the hole.
2. Clean the drain hole.
* Use a bucket and rags to clean out any debris or hair that may have accumulated in the drain hole.
* Make sure that the drain hole is free of any obstructions.
3. Apply plumber's putty to the new drain.
* Roll out a rope of plumber's putty and apply it around the rim of the new floor drain.
* The plumber's putty will help to seal the drain and prevent water from leaking out.
4. Insert the new drain into the hole.
* Carefully insert the new floor drain into the hole in the floor.
* Make sure that the drain is level and that the plumber's putty is evenly distributed around the rim.
5. Secure the drain.
* Use the screws that came with the new floor drain to secure it to the floor.
* Tighten the screws until the drain is snug.
6. Cut the drain pipe.
* Measure the distance from the floor drain to the drainpipe.
* Use a pipe cutter to cut the drain pipe to the desired length.
7. Connect the drain pipe to the drain.
* Push the drain pipe onto the floor drain.
* Use adjustable wrench to tighten the connection.
8. Test the drain.
* Pour water into the floor drain to test it.
* The water should drain away quickly and without any leaks.
Tips:
* If you are replacing a floor drain in a concrete floor, you may need to use a hammer drill to create a hole for the drain.
* If you are not comfortable working with plumbing, it is best to call a plumber to replace the floor drain for you.
* Floor drains should be cleaned regularly to prevent clogs and leaks.
By following these steps, you can easily replace a floor drain in your home.