How to Replace a Tail Light on a Tianye X460

Replacing a tail light on a Tianye X4 is a relatively simple task that can be completed in about 30 minutes. Here are the steps on how to do it:

Tools and Materials* New tail light assembly
* 10mm socket wrench
* Phillips head screwdriver
* Trim removal tool (optional)

Procedure1. Safety First
Before you begin, park your Tianye X4 on a level surface and engage the parking brake.
2. Locate the Tail Light
The tail lights are located on either side of the rear of the vehicle. Identify the tail light that needs to be replaced.
3. Remove the Trunk Liner
Open the trunk and locate the trunk liner. Remove the screws or clips holding the liner in place and carefully pull it away from the trunk.
4. Access the Tail Light Assembly
Once the trunk liner is removed, you will have access to the back of the tail light assembly. Look for the electrical connector and mounting bolts.
5. Disconnect the Electrical Connector
Locate the electrical connector for the tail light. Press the release tab and carefully unplug the connector.
6. Remove the Mounting Bolts
Use a 10mm socket wrench to remove the mounting bolts holding the tail light assembly in place. There should be two bolts on the top and one on the bottom.
7. Remove the Tail Light Assembly
Once the mounting bolts are removed, carefully pull the tail light assembly out of the vehicle. Be careful not to damage the electrical wires.
8. Replace the Tail Light Assembly
Take the new tail light assembly and align it with the mounting holes on the vehicle. Insert the mounting bolts and tighten them using the socket wrench.
9. Reconnect the Electrical Connector
Locate the electrical connector and plug it into the new tail light assembly. Make sure it is securely connected.
10. Test the Tail Light
Turn on the headlights and taillights to test the new tail light. Make sure it is working properly.
11. Replace the Trunk Liner
Reinstall the trunk liner by aligning it with the mounting holes and securing it with the screws or clips.
12. Clean Up
Clean up any tools or debris from the work area.

Additional Tips* If you have difficulty removing the trunk liner, use a trim removal tool to gently pry it away from the trunk.
* Double-check that the electrical connector is securely connected before testing the tail light.
* If you are not comfortable performing this task yourself, consult with a qualified mechanic.
By following these steps, you can easily replace a tail light on your Tianye X4 and ensure that your vehicle is roadworthy.

2025-01-12

Previous：Easy Homemade Dessert Recipes for Your Family

Next：Lysetten Hair: A Step-by-Step Guide to Its Glamorous Curls