How to Replace Your Phone‘s Outer Screen: A Step-by-Step Guide with Pictures287

If your phone's outer screen is cracked or damaged, you don't have to replace the entire device. You can replace just the outer screen yourself with a little time and effort. Here's a step-by-step guide with pictures to help you get started.

Materials You'll Need* New outer screen
* Phillips #00 screwdriver
* Spudger
* Suction cup
* Heat gun or hair dryer
* Isopropyl alcohol
* Lint-free cloth

Step 1: Power Off Your Phone

Before you begin, power off your phone completely. This will prevent any electrical damage.

Step 2: Remove the Back Cover

Use the Phillips #00 screwdriver to remove the screws that hold the back cover in place. Once the screws are removed, you should be able to pry the back cover off with your fingers. Be careful not to damage the back cover or the phone's components.

Step 3: Disconnect the Battery

Locate the battery connector and use the spudger to gently disconnect it. This will help prevent any power surges during the repair process.

Step 4: Remove the Outer Screen

Use the heat gun or hair dryer to heat the edges of the outer screen. This will loosen the adhesive that holds the screen in place. Once the adhesive is loose, you can use the suction cup to gently lift the outer screen away from the phone. Be careful not to damage the LCD screen underneath.

Step 5: Clean the Frame

Use the isopropyl alcohol and lint-free cloth to clean the frame of the phone where the outer screen was attached. This will remove any remaining adhesive and ensure that the new outer screen adheres properly.

Step 6: Install the New Outer Screen

Align the new outer screen with the frame of the phone and gently press it into place. Start from one side and work your way around the entire screen. Once the screen is in place, you can use the heat gun or hair dryer to heat the edges and seal the adhesive.

Step 7: Reconnect the Battery

Reconnect the battery connector to the phone.

Step 8: Replace the Back Cover

Replace the back cover and secure it with the screws.

Step 9: Power On Your Phone

Power on your phone and test the new outer screen.

Troubleshooting* If the new outer screen is not working properly, check to make sure that it is properly seated.
* If the adhesive is not strong enough to hold the outer screen in place, you can use a small amount of super glue.
* If the LCD screen is damaged, you will need to replace the entire display assembly.

Conclusion

Replacing your phone's outer screen is a relatively simple repair that can save you a lot of money. By following the steps in this guide, you can get your phone looking like new again in no time.

2024-12-14

Previous：How to Flash an LG Phone: A Comprehensive Guide

Next：Linux Shell Scripting Video Tutorials: A Comprehensive Guide