How to Replace the Screen on a ZTE Phone: A Step-by-Step Guide with Pictures141

Introduction

A cracked or damaged phone screen can be a major inconvenience. Not only does it make your phone difficult to use, but it can also expose your personal data to others. If you're looking to replace the screen on your ZTE phone, this guide will provide you with all the information you need to get the job done.

What You'll Need

Before you begin, you'll need to gather the following tools and materials:
New ZTE phone screen
Phillips #00 screwdriver
Torx T5 screwdriver
Spudger
Suction cup
Heat gun or hairdryer

Step 1: Power Off the Phone and Remove the Back Cover

Before you start disassembling your phone, make sure to power it off completely. Then, remove the back cover by gently prying it off with your spudger.

Step 2: Remove the Battery

Once the back cover is removed, you'll need to disconnect the battery. To do this, use your spudger to gently pry up the battery connector. Then, carefully remove the battery from the phone.

Step 3: Remove the SIM Card and MicroSD Card

If your phone has a SIM card or microSD card, remove them now. To remove the SIM card, use your SIM card ejector tool. To remove the microSD card, simply press on it and it will pop out.

Step 4: Remove the Screws Securing the Midframe

There are several screws securing the midframe to the phone. Use your Phillips #00 screwdriver to remove all of the screws.

Step 5: Remove the Midframe

Once all of the screws are removed, you can carefully remove the midframe by gently prying it off with your spudger.

Step 6: Disconnect the Display Assembly

There are two connectors that connect the display assembly to the motherboard. Use your spudger to gently disconnect both of these connectors.

Step 7: Remove the Display Assembly

Once the connectors are disconnected, you can carefully remove the display assembly by gently pulling it away from the phone.

Step 8: Remove the Old Screen

The old screen is held in place by several clips. Use your spudger to gently pry up the clips and remove the screen.

Step 9: Install the New Screen

Carefully align the new screen with the phone and gently press it into place. Make sure that the clips are all snapped into place.

Step 10: Reconnect the Display Assembly

Reconnect the two connectors that connect the display assembly to the motherboard.

Step 11: Replace the Midframe

Align the midframe with the phone and gently press it into place. Make sure that all of the screws are tightened.

Step 12: Insert the Battery

Insert the battery into the phone and connect the battery connector.

Step 13: Replace the Back Cover

Align the back cover with the phone and gently press it into place.

Step 14: Power On the Phone

Power on the phone to verify that the new screen is working properly.

Conclusion

Replacing the screen on a ZTE phone is a relatively simple process that can be completed in about 30 minutes. By following the steps in this guide, you can save yourself the cost of having to replace the entire phone.

2024-12-17

Previous：Visual Studio 2010 Database Development Tutorial

Next：Create Captivating Presentations on Mobile with These PowerPoint Software Apps