How to Replace a Glass Screen on a LeEco Phone239

If you've cracked the glass screen on your LeEco phone, don't despair. You can replace it yourself with a little patience and the right tools. Here's a step-by-step guide to help you get started:

Tools and Materials You'll Need:* New glass screen for your LeEco phone model
* Phillips #000 screwdriver
* Tri-wing screwdriver
* Suction cup
* Heat gun or hair dryer
* Plastic spudger
* Tweezers
* Adhesive tape

Step-by-Step Instructions:

1. Power Down and Remove the Back Cover

* Turn off your phone and remove the back cover.

2. Remove the Battery

* Using a plastic spudger, gently pry up the battery connector.
* Remove the battery by pulling it straight up.

3. Remove the Screws

* Use a Phillips #000 screwdriver to remove the three screws that hold the motherboard in place.
* Use a Tri-wing screwdriver to remove the two screws that hold the daughterboard in place.

4. Disconnect the Cables

* Use a plastic spudger to disconnect the following cables:
* Camera cable
* Display cable
* Digitizer cable

5. Remove the Motherboard

* Gently lift the motherboard out of the phone.

6. Remove the Daughterboard

* Gently lift the daughterboard out of the phone.

7. Heat the Glass Screen

* Use a heat gun or hair dryer to heat the glass screen around the edges. This will soften the adhesive holding it in place.

8. Pry Up the Glass Screen

* Use a suction cup to lift up the glass screen.
* Insert a plastic spudger into the gap and gently pry up the glass screen.

9. Remove the Glass Screen

* Once the glass screen is loose, remove it completely.

10. Clean the Frame

* Use a cotton swab dipped in isopropyl alcohol to clean the frame of any remaining adhesive.

11. Apply New Adhesive

* Apply a thin layer of adhesive to the frame where the new glass screen will go.

12. Align and Install New Glass Screen

* Align the new glass screen with the frame and press it down firmly.

13. Reconnect Cables

* Reconnect the following cables:
* Camera cable
* Display cable
* Digitizer cable

14. Install Daughterboard and Motherboard

* Install the daughterboard and motherboard into the phone.

15. Install Screws

* Use a Tri-wing screwdriver to install the two screws that hold the daughterboard in place.
* Use a Phillips #000 screwdriver to install the three screws that hold the motherboard in place.

16. Install Battery

* Install the battery by inserting it into the phone and pressing it down firmly.

17. Install Back Cover

* Install the back cover by pressing it down firmly around the edges.

18. Power On and Test

* Power on your phone and test the new glass screen.

Tips:* Be careful not to damage the cables when disconnecting and reconnecting them.
* If you're having trouble removing the glass screen, try heating it up for longer.
* If you're not comfortable replacing the glass screen yourself, you can take it to a repair shop.

Conclusion:Replacing the glass screen on your LeEco phone is a relatively easy process with the right tools and instructions. By following these steps carefully, you can get your phone looking and working like new again.

2024-12-20

---

Previous：Meitu Xiu Xiu Filter Tutorial: Enhance Your Photos with Stunning Effects

Next：AI-Powered Image Editing: A Step-by-Step Guide