DIY Circular Phone Stand110

Have you ever wished you could prop up your phone hands-free without having to constantly search for something to lean it against? Well, with a few simple materials and a little bit of time, you can make your own circular phone stand that is both stylish and functional.

Here's a step-by-step tutorial on how to make your own circular phone stand:Materials:
* 1/4-inch thick piece of wood (or other sturdy material)
* Circular saw or jigsaw
* Drill with Forstner bit
* Sandpaper or sanding sponge
* Wood glue
* Clamps
* Finishing oil or paint (optional)
Instructions:
Step 1: Cut out the circular base.
Using a circular saw or jigsaw, cut a circle out of the wood. The diameter of the circle will depend on the size of your phone. For most phones, a circle with a diameter of about 4-5 inches will work well.
Step 2: Drill a hole for the phone.
Using a drill with a Forstner bit, drill a hole in the center of the circle. The diameter of the hole should be slightly smaller than the thickness of your phone.
Step 3: Sand the edges.
Use sandpaper or a sanding sponge to smooth the edges of the circle and the hole.
Step 4: Apply wood glue.
Apply a generous amount of wood glue to the edges of the hole.
Step 5: Insert the phone.
Insert the phone into the hole, making sure that it fits snugly.
Step 6: Clamp the stand.
Use clamps to hold the phone in place while the glue dries. Allow the glue to dry for at least 24 hours.
Step 7: Finish the stand (optional).
Once the glue is dry, you can finish the stand with a coat of finishing oil or paint. This will help to protect the wood and give it a more polished look.
Tips:
* You can use any type of wood you like for your stand. However, hardwoods such as oak or maple will be more durable.
* If you don't have a circular saw or jigsaw, you can cut out the circle using a coping saw or a scroll saw.
* Be sure to drill the hole in the center of the circle. Otherwise, your phone will not sit properly in the stand.
* If you want to make a stand that can accommodate different sized phones, you can drill multiple holes of different diameters.
Conclusion:
Making your own circular phone stand is a quick and easy project that can be completed in just a few hours. With a few simple materials and a little bit of time, you can create a stylish and functional accessory that will make using your phone hands-free a breeze.