Honor 20 Charging Cable Teardown Guide97

The Honor 20 is a mid-range smartphone that was released in May 2019. It has a 6.26-inch LCD display, a Kirin 980 processor, and 6GB of RAM. The Honor 20 also has a triple-lens rear camera system and a 3,750mAh battery.

The Honor 20 comes with a USB-C charging cable. This cable is used to charge the phone and transfer data. The cable is made of durable materials and has a length of 1 meter.

If you need to repair or replace the charging cable for your Honor 20, you can follow the steps in this guide. The guide is easy to follow and does not require any special tools or skills.

Tools and materials
Phillips #000 screwdriver
Spudger
New USB-C charging cable

Instructions
Power off the Honor 20.
Remove the two screws that are located on the bottom of the phone.
Use a spudger to pry open the back cover of the phone.
Disconnect the battery connector.
Remove the four screws that are located around the USB-C port.
Disconnect the USB-C charging cable.
Install the new USB-C charging cable.
Connect the battery connector.
Replace the back cover of the phone.
Tighten the two screws that are located on the bottom of the phone.
Power on the Honor 20.

Tips
Be careful not to damage the battery connector when disconnecting it.
Do not overtighten the screws when replacing the back cover of the phone.
If you are having difficulty removing the back cover of the phone, you can use a heat gun to soften the adhesive.

Conclusion

Replacing the charging cable on the Honor 20 is a relatively easy process. By following the steps in this guide, you can replace the cable in just a few minutes.

2025-02-16

Previous：How to Connect an Apple Lightning Cable to an External Sound Card

Next：AI Tutorial: Mastering the Art of Lines