How to Separate a Phone‘s Inner and Outer Screen23

Separating a phone's inner and outer screen can be a tricky process, but it can be done with the right tools and some patience. Here is a step-by-step guide on how to do it.

Tools You'll Need
Suction cup
Heat gun or hair dryer
Plastic pry tool
Spudger
Adhesive tape

Steps
Power off your phone and remove the battery. This is important to prevent any damage to the phone's internal components.
Apply heat to the edges of the outer screen. This will help to soften the adhesive that holds the screen in place.
Attach a suction cup to the outer screen. Gently pull on the suction cup to create a gap between the outer screen and the frame.
Insert a plastic pry tool into the gap. Use the pry tool to carefully pry the outer screen away from the frame.
Disconnect the ribbon cable that connects the outer screen to the phone's motherboard.
Remove the outer screen.
Clean the adhesive residue from the frame.
Apply new adhesive tape to the frame.
Align the outer screen with the frame.
Press down on the outer screen to secure it in place.
Reconnect the ribbon cable.
Power on your phone and test the outer screen.

Tips
Be patient and take your time. Rushing through the process can cause damage to the phone.
Use a heat gun or hair dryer to soften the adhesive, but be careful not to overheat the phone.
Use a plastic pry tool to avoid scratching the phone's frame.
If you are having trouble separating the outer screen, you can try using a spudger to pry it away from the frame.

Troubleshooting
If the outer screen is cracked, you may not be able to separate it from the frame without damaging it.
If the ribbon cable is damaged, you will need to replace it.
If you are having trouble pressing the outer screen into place, you can try using a rubber mallet to tap it into place.

2024-11-17

Previous：How to Make Games with CodeCat - A Step-by-Step Tutorial

Next：How to Open the Back Cover of a Vivo Smartphone